Kernel 2.6.19

ermastr · Messaggio da **ermastr** » dom 10 dic 2006, 21:14

Citazione
Un altra cosa, i moduli del kernel devono stare in /lib/modules/uname -r

Scusami, mi puoi spiegare la procedura per spostare i nuovi moduli in /uname -r
A questo punto non mi è chiara la procedura per /uname -r, cosa devo fare di preciso, perchè i nuovi moduli vengono posizionati di default in /lib/modules.
ciao e grazie

Messaggio da **targzeta** » dom 10 dic 2006, 23:29

Scusami,
ma quello da dui scrocco la rete si è accorto e sono stato off-line per un pò

.
comunque, non è colpa dei moduli se vedi lo schermo nero all'avvio. Prova a disabilitare il frame buffer radeon e poi vedi.
Ma il computer funziona? Nel senso, l'HD lo vedi che legge? o si pianta tutto?

Per la questione dei moduli,
uname è un programma, e

Codice: Seleziona tutto

uname -r

da in output la versione del kernel attualmente in esecuzione.
quindi, nel mio caso che ho un kernel 2.6.19:

Codice: Seleziona tutto

/lib/modules/`uname -r`

mi dà:

Codice: Seleziona tutto

/lib/mudules/2.6.19

Fai un copia e incolla da qui e vedrai la directory.
comunque, una volta eseguita la compilazione del kernel, con make, basta eseguire

Codice: Seleziona tutto

make modules_install

per installare i moduli nella giusta directory.

Fammi sapere
Spina

ermastr · Messaggio da **ermastr** » lun 11 dic 2006, 18:13

salve

Ho ricompilato il kernel, aggiunto a lilo.conf le voci:
image = /boot/vmlinuz-new
root = /dev/hda3
label = Slacky-new
read-only
# Linux bootable partition config ends

al boot se scelgo di avviare con Slacky-new (quindi con il kernel ricompilato) appare il framebuffer (ho disattivato quello ATI) ma quasi subito un bel: kernel panic VFS unable to mount root filesystem in unknow bloch (3,3):
eppure l'output:
root@radura:~# sed -n '/_FS/p;/FRAME.*CONSOLE/p' /boot/config-new
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_OCFS2_FS=m
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=m
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_CONFIGFS_FS=m
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_NFS_FS=m
CONFIG_SMB_FS=m
CONFIG_NCP_FS=m
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_9P_FS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_TEXTSEARCH_FSM=m
Se invece riavvio con il vecchio kernel e i moduli nuovi (ciè rinomino i vecchi,
e lascio solo quelli nuovi nominandoli 2.6.18, non mi funziona più l'audio la stampante il modem ecc . E anche in questo caso l'output per laudio mi dà:

root@radura:~# sed -nu '/_SND/p;/FRAME.*CONSOLE/p' /boot/config-new
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_ADLIB is not set
#CONFIG_SND_SB8=m
#CONFIG_SND_SB16=m
#CONFIG_SND_SBAWE=m
#CONFIG_SND_SB16_CSP=y
#CONFIG_SND_YMFPCI=m
#CONFIG_SND_USB_AUDIO=m
#CONFIG_SND_USB_USX2Y=m

Citazione

Per la questione dei moduli, uname è un programma, e
Codice:
uname -r

root@radura:~# cd /lib/modules
root@radura:/lib/modules# uname -r
2.6.18

Citazione
comunque, una volta eseguita la compilazione del kernel con make basta eseguire:

Codice:make modules_install

per installare i moduli nella giusta directory.

Se non rinomino i moduli, quelli vecchi vengono sovrascritti e se qualcosa non funziona non posso usare il vecchio kernel. Comincio a dubitare che il problema sia nel processo di compilazione.
Non riesco a capire dove sbaglio la ricompilazione poichè ho seguito
l'howto di Slacky:

Citazione

Prima cosa fatevi un backup della vostra /lib/modules/versione-kernel, questa dir viene sovrascritta in fase di installazione dei moduli, e vi assicura dei moduli funzionanti in caso di ripristino.

# cd /usr/src/linux # make clean
# make menuconfig

Ho apportato le modifiche e ho salvato la nuova configurazione usando la funzione Save Configuration to an Alternate File così da non sovrascrivere il config funzionante, col nome config-new,quindi:
#make bzImage
# make modules
# make modules_install

# #mv System.map /boot/System.map-new
# cp .config /boot/config-new
# mv /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz-new
ermanno

Messaggio da **targzeta** » lun 11 dic 2006, 18:31

nono, va bene!
Per quanto riguarda il buckup, se usi il kernel 2.4.X del CD di Slackware non ti preocupare.
E' vero che la directory viene sovrascritta, ma è anche vero che viene sovrascritta solo quella del kernel corrente, ti ricordi? uname -r.
Fai un ls in /lib/modules, e vedrai che c'è una directory per ogni versione del kernel che hai installato.
Anche perchè, si suppone che:
- Compili il kernel per una versione successiva
- Se lo compili per la stessa versione, i moduli che SAI funzionano no ha senzo toglierli.

Detto questo torniamo a noi. Il tuo problema ora è un altro, non hai configurato bene il controller per il tuo bus IDE (o derivati), insomma, il kernel non sa gestire il tuo HD.
Posta l'output di

Codice: Seleziona tutto

lspci

che poi vediamo di rimediare anche a questo

Spina

ermastr · Messaggio da **ermastr** » mar 12 dic 2006, 12:58

Citazione

Detto questo torniamo a noi. Il tuo problema ora è un altro, non hai configurato bene il controller per il tuo bus IDE (o derivati), insomma, il kernel non sa gestire il tuo HD. Posta l'output di

Codice:
lspci

root@radura:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0d.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
00:0d.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
00:0d.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
00:0f.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
00:0f.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03)
00:0f.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VEHo ricompilato prendendo il config del kernel funzionante e lo modifico dove mi serve, senza toccare altro, per cui in teoria dovrei trovare tutto funzionante alla fine della compilazione e invece:
root@radura:~# dmesg
9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:0d.1 -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
PCI: VIA IRQ fixup for 0000:00:0d.1, from 255 to 9
uhci_hcd 0000:00:0d.1: UHCI Host Controller
uhci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:0d.1: irq 9, io base 0x0000b400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKE] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.0: irq 3, io base 0x0000a400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1 -> Link [LNKE] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:10.1: irq 3, io base 0x0000a000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 2-4: new high speed USB device using ehci_hcd and address 3
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKE] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:10.2: irq 3, io base 0x00009800
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-4: configuration #1 chosen from 1 choice
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0021053f51]
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: Logitech Optical USB Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0d.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 730 MB/s
raid6: int32x2 919 MB/s
raid6: int32x4 568 MB/s
raid6: int32x8 537 MB/s
raid6: mmxx1 1500 MB/s
raid6: mmxx2 2605 MB/s
raid6: sse1x1 716 MB/s
raid6: sse1x2 1432 MB/s
raid6: using algorithm sse1x2 (1432 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 2352.000 MB/sec
raid5: using function: pIII_sse (2352.000 MB/sec)
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Time: tsc clocksource has been installed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input1
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 288k freed
Adding 353388k swap on /dev/hda5. Priority:-1 extents:1 across:353388k
ieee1394: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ohci1394: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
gameport: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
serio_raw: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
pcspkr: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
emu10k1_gp: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
soundcore: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
bluetooth: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
bluetooth: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
bluetooth: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
agpgart: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
evdev: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
i2c_core: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
via_agp: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
mii: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_hwdep: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
i2c_viapro: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
via_rhine: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_util_mem: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_page_alloc: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_timer: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_seq_device: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_pcm: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_ac97_bus: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_ac97_codec: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_rawmidi: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_emu10k1: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
hci_usb: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
hci_usb: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
hci_usb: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ehci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ehci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
shpchp: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
evdev: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
psmouse: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
pcspkr: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
parport: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
parport_pc: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
parport: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
lp: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
agpgart: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
commoncap: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
capability: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
NTFS volume version 3.1.
evdev: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
evdev: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
agpgart: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
via_agp: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
shpchp: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ehci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ieee1394: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ohci1394: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
soundcore: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_hwdep: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_util_mem: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_page_alloc: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_timer: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_seq_device: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_pcm: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_ac97_bus: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_ac97_codec: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_rawmidi: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_emu10k1: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
uhci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ehci_hcd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
i2c_core: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
i2c_viapro: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
gameport: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
emu10k1_gp: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
sg: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
bluetooth: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
hci_usb: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
bluetooth: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
hci_usb: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
mii: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
via_rhine: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
bluetooth: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
hci_usb: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
pcspkr: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
serio_raw: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ipv6: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ipv6: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
commoncap: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
capability: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ipv6: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ipv6: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ipv6: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
appletalk: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
appletalk: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
appletalk: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
appletalk: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
appletalk: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
soundcore: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2. gcc-3.4'
snd: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 m 4'
snd_hwdep: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2. gcc-3.4'
snd_util_mem: version magic '2.6.18 mod_unload K7 gcc-3.4' should be 86 gcc-3.4'
snd_page_alloc: version magic '2.6.18 mod_unload K7 gcc-3.4' should b 486 gcc-3.4'
snd_timer: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2. gcc-3.4'
snd_seq_device: version magic '2.6.18 mod_unload K7 gcc-3.4' should b 486 gcc-3.4'
snd_pcm: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6. c-3.4'
snd_ac97_bus: version magic '2.6.18 mod_unload K7 gcc-3.4' should be 86 gcc-3.4'
snd_ac97_codec: version magic '2.6.18 mod_unload K7 gcc-3.4' should b 486 gcc-3.4'
snd_rawmidi: version magic '2.6.18 mod_unload K7 gcc-3.4' should be ' 6 gcc-3.4'
snd_emu10k1: version magic '2.6.18 mod_unload K7 gcc-3.4' should be ' 6 gcc-3.4'

ermanno

Messaggio da **targzeta** » mar 12 dic 2006, 16:36

ermastr ha scritto: 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0d.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
00:0d.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
00:0d.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
00:0f.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
00:0f.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03)
00:0f.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE

Come si vede, il tuo controller IDE è un VIA Technologies. Per abilitarlo nel kernel vai in questa sezione:

Codice: Seleziona tutto

Device Drivers --> ATA/ATAPI/MFM/RLL support

e abilita SOLO:

Codice: Seleziona tutto

ATA/ATAPI/MFM/RLL support
  Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
  Include IDE/ATA-2 DISK support 
  Use multi-mode by default
  Include IDE/ATAPI CDROM support
  Include IDE/ATAPI FLOPPY support       <== Se hai un lettore floppy
  PCI IDE chipset support
    Generic PCI bus-master DMA support 
      Use PCI DMA by default when available
      VIA82CXXX chipset support

Vedi che le ho indentate come stanno nel menuconfig.
Fatto ciò lancia

Codice: Seleziona tutto

make && make modules_install

e se non hai modificato altro da quando dall'ultimo post, dovrebbe andare tutto liscio sino al login.

Fammi sapere
Spina

P.S. Tutti gli errori che si sono verificati prima sono da attribuire ad una compilazione dei moduli con un compilatore diverso da quello con cui è stato compilato il kernel.

Pippi.S. Dopo che hai compilato il kernel con make, devi copiare il nuovo kernel in questo modo (rimanendo nella directory in cui hai lanciato make):

Codice: Seleziona tutto

mv arch/i386/boot/bzImage /boot/vmlinuz-new

(mi sono basato sul lilo.conf che mi hai mandato), lanci lilo e riavvii il computer.

ermastr · Messaggio da **ermastr** » mar 12 dic 2006, 19:28

Ho ricompilato ma se all'avvio scelgo la voce Slacky (che fa riferimento a vimlinuz-new) dopo poco mi da il solito kernel-panic e se scelgo di partire con
la voce slack (rif vimlinuz precedente) e i nuovi moduli non mi funziona più l'audio, mentre con quelli old si:

root@radura:~# dmesg | tail
snd_hwdep: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_util_mem: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_page_alloc: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_timer: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
snd_seq_device: version magic '2.6.18 mod_unload K7 gcc-3.4' should be '2.6.18 mod_unload 486 gcc-3.4'
ecc
Il resto mi sembra funzionare

L'output di lsmod

root@radura:~# lsmod
Module Size Used by

eppure

root@radura:~# sed -n '/_SND/p;/FRAME.*CONSOLE/p' /boot/config-new
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_DT019X=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_GUS_SYNTH=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
C'è molta roba inutile, (mi hanno regalato un'audigy 1) lo so ma ho preferito non toccare nulla per quanto riguarda il suono, perchè tutto funziona con il kernel originale e non volevo rischiare

grazie ermanno

Messaggio da **targzeta** » mar 12 dic 2006, 19:54

Ma tutti e due i kernel sono 2.6.18?
Indichiamo con k1 il kernel che ti funziona e con k2 il kernel che stiamo compilando.
Innanzi tutto voglio capire qual'è il kernel panic che ti da!
comunque, dato che hai compilato i moduli per il k2, il k1 che ha la stessa versione cerca di usarli per quel discorso che ti ho spiegato prima. Il punto è che i nuovi moduli li hai compilati per un processore Athlon, mentre il kernel k1 è compilato per un processore pentium 486, ecco perciò che ti viene segnalato l'errore e nessun modulo potrà essere caricato.

Spina

P.S. tagliamo la testa al toro, mandami:

- config del k1.
- config del k2.
- output di lspci.
- lilo.conf
- output di mount.

all'indirizzo spina80@freemail.it. Stanotte poi ci dò uno sguardo e ti faccio sapere.