slacky.eu

Codice: Seleziona tutto

hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0020
ehci_hcd 0000:00:03.3: GetStatus port 5 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
usb 1-5: USB disconnect, address 5
usb 1-5: usb_disable_device nuking all URBs
usb 1-5: unregistering interface 1-5:1.0
usb-storage: storage_disconnect() called
usb-storage: usb_stor_stop_transport called
usb-storage: -- usb_stor_release_resources
usb-storage: -- sending exit command to thread
usb-storage: -- dissociate_dev
usb 1-5:1.0: hotplug
usb 1-5: unregistering device
usb 1-5: hotplug
usb-storage: *** thread awakened.
usb-storage: -- exiting
hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0020
ehci_hcd 0000:00:03.3: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:03.3: port 5 high speed
ehci_hcd 0000:00:03.3: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
usb 1-5: new high speed USB device using ehci_hcd and address 6
ehci_hcd 0000:00:03.3: port 5 high speed
ehci_hcd 0000:00:03.3: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
usb 1-5: default language 0x0409
usb 1-5: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: Flash Disk
usb 1-5: Manufacturer: USB
usb 1-5: hotplug
usb 1-5: adding 1-5:1.0 (config #1, interface 0)
usb 1-5:1.0: hotplug
usb-storage 1-5:1.0: usb_probe_interface
usb-storage 1-5:1.0: usb_probe_interface - got id
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x0ea0, Product: 0x2168, Revision: 0x0200
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_messaggio: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: *** thread sleeping.
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage:  12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
  Vendor: USB       Model: BAR               Rev: 2.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: device scan complete