ACPI: DSDT 7FFC0430, 89E6 (r1 0AAAA 0AAAA000 0 INTL 2002026)
ACPI: FACS 7FFCF000, 0040
ACPI: APIC 7FFC0390, 0054 (r1 A M I OEMAPIC 9000526 MSFT 97)
ACPI: MCFG 7FFC03F0, 003C (r1 A M I OEMMCFG 9000526 MSFT 97)
ACPI: OEMB 7FFCF040, 0040 (r1 A M I AMI_OEM 9000526 MSFT 97)
ACPI: SSDT 7FFC8E20, 02D2 (r1 AMI CPU1PM 1 INTL 2002026)
ACPI: Local APIC address 0xfee00000
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00011000 - 00017f00
(8 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 00000
01000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 00000
02000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 00000
07000]
#3 [0000100000 - 0000b3c674] TEXT DATA BSS ==> [0000100000 - 0000b
3c674]
#4 [0000b3d000 - 0000b41000] INIT_PG_TABLE ==> [0000b3d000 - 0000b
41000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 00001
00000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 00000
11000]
#7 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 00000
18000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007ffc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffc0
On node 0 totalpages: 524111
free_area_init_node: node 0, pgdat c09e6900, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294578 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ed14000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 40960 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 52
0015
Kernel command line: BOOT_IMAGE=Linux ro root=304 vt.default_utf8=1
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1729.255 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2067856k/2096896k available (6857k kernel code, 27780k reserved
, 2492k data, 456k init, 1187592k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0a2e000 - 0xc0aa0000 ( 456 kB)
.data : 0xc07b2447 - 0xc0a21520 (2492 kB)
.text : 0xc0100000 - 0xc07b2447 (6857 kB)
Checking if this processor honours the WP bit even in supervisor mode..
.Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequenc
y.. 3458.51 BogoMIPS (lpj=6917020)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 38k freed
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (3458.51 BogoMIPS).
net_namespace: 956 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 4632.000 MB/sec
xor: using function: pIII_sse (4632.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xe480-0xe49f]
pci 0000:00:1d.1: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:1d.2: reg 20 io port: [0xe880-0xe89f]
pci 0000:00:1d.3: reg 20 io port: [0xec00-0xec1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: Enabled ICH6/i801 SMBus device
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff
pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0a00-0a0f
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:03:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:03:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfaa00000-0xfeafffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xbfe00000-0xdfefffff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa9f8000-0xfa9fbfff]
pci 0000:01:00.0: reg 14 io port: [0xd800-0xd8ff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfa9c0000-0xfa9dffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:01:01.0: supports D1 D2
pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:01.0: PME# disabled
pci 0000:01:01.1: reg 10 32bit mmio: [0xfa9fe000-0xfa9fe7ff]
pci 0000:01:01.1: PME# supported from D0 D3hot D3cold
pci 0000:01:01.1: PME# disabled
pci 0000:01:01.2: reg 10 32bit mmio: [0xfa9fe800-0xfa9fe8ff]
pci 0000:01:01.2: supports D1 D2
pci 0000:01:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:01.2: PME# disabled
pci 0000:01:01.3: reg 10 32bit mmio: [0xfa9fec00-0xfa9fecff]
pci 0000:01:01.3: supports D1 D2
pci 0000:01:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:01.3: PME# disabled
pci 0000:01:03.0: reg 10 32bit mmio: [0xfa9ff000-0xfa9fffff]
pci 0000:01:03.0: PME# supported from D0 D3hot D3cold
pci 0000:01:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfa900000-0xfa9fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
ACPI: Power Resource [GFAN] (off)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x400-0x41f has been reserved
system 00:09: ioport range 0x480-0x4bf has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0d: iomem range 0xfec00001-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:03
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfaa00000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x000000bfe00000-0x000000dfefffff
pci 0000:01:01.0: CardBus bridge, secondary bus 0000:02
pci 0000:01:01.0: IO window: 0x00d000-0x00d0ff
pci 0000:01:01.0: IO window: 0x00d400-0x00d4ff
pci 0000:01:01.0: PREFETCH window: 0x88000000-0x8bffffff
pci 0000:01:01.0: MEM window: 0x90000000-0x93ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: 0xd000-0xdfff
pci 0000:00:1e.0: MEM window: 0xfa900000-0xfa9fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008dffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:01:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0xfaa00000-0xfeafffff]
pci_bus 0000:03: resource 2 mem: [0xbfe00000-0xdfefffff]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xfa900000-0xfa9fffff]
pci_bus 0000:01: resource 2 mem: [0x88000000-0x8dffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xd000-0xd0ff]
pci_bus 0000:02: resource 1 io: [0xd400-0xd4ff]
pci_bus 0000:02: resource 2 mem: [0x88000000-0x8bffffff]
pci_bus 0000:02: resource 3 mem: [0x90000000-0x93ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no d
ebug enabled
SGI XFS Quota Management subsystem
GFS2 (built Apr 27 2009 15:55:49) installed
msgmni has been set to 1720
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:03:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xf8580000, using 1536k, t
otal 65536k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:d4d0
vesafb: pmi: set display start = c00cd506, set palette = c00cd570
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3c
e 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input
0
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x04)
pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7
ide1: BM-DMA at 0xffa8-0xffaf
Probing IDE interface ide0...
hda: SAMSUNG HM160JC, ATA DISK drive
hdb: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
ide-cd driver 5.00
ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fcoe_transport_register:fcoesw
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ usin
g iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.03.00-k
4
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.0
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ohci1394 0000:01:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[fa9fe000-fa9fe
7ff] Max Packet=[2048] IR/IT contexts=[4/4]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.2-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.2-smp uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.2-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.2-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29.2-smp uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 612 MB/s
raid6: int32x2 689 MB/s
raid6: int32x4 623 MB/s
raid6: int32x8 467 MB/s
raid6: mmxx1 1803 MB/s
raid6: mmxx2 2049 MB/s
raid6: sse1x1 1295 MB/s
raid6: sse1x2 2111 MB/s
raid6: sse2x1 2301 MB/s
raid6: sse2x2 2617 MB/s
raid6: using algorithm sse2x2 (2617 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@r
edhat.com
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/i
nput/input1
usb 1-1: new high speed USB device using ehci_hcd and address 2
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
usb 1-1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Mass Storage Device
usb 1-1: Manufacturer: JetFlash
usb 1-1: SerialNumber: NZ3C4FUB
usb 1-1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003441ac8]
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 3:4.
Freeing unused kernel memory: 456k freed
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: New USB device found, idVendor=152e, idProduct=2507
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Super Multi Rewriter
usb 1-3: Manufacturer: HLDS Inc.
usb 1-3: SerialNumber: P01070902151023
usb 1-3: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-5: new high speed USB device using ehci_hcd and address 5
usb 1-5: New USB device found, idVendor=0402, idProduct=5602
usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5: Product: USB2.0 Camera
usb 1-5: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: New USB device found, idVendor=13ee, idProduct=0003
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Optical Mouse
usb 2-2: Manufacturer: MosArt
usb 2-2: configuration #1 chosen from 1 choice
input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-
2/2-2:1.0/input/input2
generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [Mo
sArt Optical Mouse] on usb-0000:00:1d.0-2/input0
ACPI: AC Adapter [AC0] (on-line)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inpu
t3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/in
put4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/i
nput/input5
ACPI: Sleep Button (CM) [SLPB]
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
intel_rng: FWH not detected
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Linux video capture interface: v2.00
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.in
tel.com>
yenta_cardbus 0000:01:01.0: CardBus bridge found [1043:1177]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26
/device:27/input/input6
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
gspca: main v2.4.0 registered
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
ppdev: user-space parallel port driver
yenta_cardbus 0000:01:01.0: ISA IRQ mask 0x0c38, PCI irq 17
yenta_cardbus 0000:01:01.0: Socket status: 30000006
yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge I/O window: 0xd00
0 - 0xdfff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean.
yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0x
fa900000 - 0xfa9fffff
yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0x
88000000 - 0x8dffffff
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
skge 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
skge 1.13 addr 0xfa9f8000 irq 20 chip Yukon-Lite rev 9
skge eth0: addr 00:15:f2:4e:7b:8a
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to TSC halts in idle
input: ImPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/inpu
t/input7
sdhci-pci 0000:01:01.2: SDHCI controller found [1180:0822] (rev 17)
sdhci-pci 0000:01:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:01:01.2] using PIO
fan PNP0C0B:00: registered as cooling_device1
ACPI: Fan [FN00] (off)
asus-laptop: Asus Laptop Support version 0.42
asus-laptop: A6VC model detected
input: Asus Laptop extra buttons as /devices/virtual/input/input8
Registered led device: asus::mail
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
gspca: probing 0402:5602
ALi m5602: Probing for a po1030 sensor
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200 0000:01:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
eth1 (ipw2200): not using net_device_ops yet
ipw2200 0000:01:03.0: firmware: requesting ipw2200-bss.fw
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (53 C)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI regio
n SMB0 [0x400-0x40f]
ACPI: Device needs an ACPI driver
ALi m5602: Probing for a mt9m111 sensor
ALi m5602: Probing for a s5k4aa sensor
ALi m5602: Probing for an ov9650 sensor
mmc0: new SDHC card at address b368
Clocksource tsc unstable (delta = -81877280 ns)
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channe
ls)
ALi m5602: Detected an ov9650 sensor
mmcblk0: mmc0:b368 SDC 7.46 GiB
mmcblk0: p1
ALi m5602: vflip quirk active
gspca: probe ok
usbcore: registered new interface driver ALi m5602
ALi m5602: registered
Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1 across:105224
8k
fuse init (API version 7.11)
scsi 2:0:0:0: Direct-Access JetFlash TS2GJFV30 8.07 PQ: 0 AN
SI: 2
sd 2:0:0:0: [sda] 3969024 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] 3969024 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda:<6>EXT3 FS on hda4, internal journal
sda1
sd 2:0:0:0: [sda] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-E60L 1.00 PQ: 0 AN SI: 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb-storage: device scan complete
lp0: using parport0 (interrupt-driven).
lp0: console ready
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
warning: `named' uses 32-bit capabilities (legacy support in use)
eth1: no IPv6 routers present
lib80211_crypt: registered algorithm 'WEP'
eth1: no IPv6 routers present
eth1: Setting MAC to 00:16
de:ea:51
