Problemi vari con Slackware

[mr.simo]

Salve a tutti, sono di nuovo qui per chiedere un attimo aiuto su vari problemi riscontrati in slackware...
Dunque..

Il problema principale è che veramente non riesco a configurare la wireless... ho seguito un how to, ho editato il file inet1.conf , ho dato un restart pero non riesco a venirne a capo... Questo varie volte....

Non riesco a trovare le configurazioni della tastiera, ma a parte quello, per esempio non riesco ad accedere al forum... Da un altro pc con distro differente riesco, ma da quello della Slack no... [-(

Qualcuno mi puo consigliare qualche dritta please?
Grazie in anticipo....

[Blallo]

postaci lspci -v

[mr.simo]

Questo è l'output;

Codice: Seleziona tutto

   

[b]00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, fast devsel, latency 0
	Capabilities: [e0] Vendor Specific Information <?>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, fast devsel, latency 0, IRQ 29
	Memory at f4000000 (64-bit, non-prefetchable) [size=4M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 1800 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [d0] Power Management version 3

00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, fast devsel, latency 0
	Memory at f4400000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: [d0] Power Management version 3

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at 1820 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at 1840 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0, IRQ 20
	I/O ports at 1860 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0, IRQ 20
	Memory at f4a04800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, fast devsel, latency 0, IRQ 21
	Memory at f4800000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [130] Root Complex Link <?>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: f4500000-f45fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 013c
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f4600000-f46fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 013c
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=06, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f2000000-f3ffffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 013c
	Capabilities: [a0] Power Management version 2
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0, IRQ 23
	I/O ports at 1880 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0, IRQ 17
	I/O ports at 18a0 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at 18c0 [size=32]
	Capabilities: [50] PCI Advanced Features
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at f4a04c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=0d, subordinate=11, sec-latency=32
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f4700000-f47fffff
	Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
	Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device 013c

00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information <?>
	Kernel modules: iTCO_wdt

00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
	I/O ports at 1818 [size=8]
	I/O ports at 180c [size=4]
	I/O ports at 1810 [size=8]
	I/O ports at 1808 [size=4]
	I/O ports at 18e0 [size=32]
	Memory at f4a04000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
	Capabilities: [70] Power Management version 3
	Capabilities: [a8] SATA HBA <?>
	Capabilities: [b0] PCI Advanced Features
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: medium devsel, IRQ 19
	Memory at 54000000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 1c00 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet PCIe (rev 10)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, fast devsel, latency 0, IRQ 28
	Memory at f4500000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [48] Power Management version 3
	Capabilities: [40] Vital Product Data
	Capabilities: [60] Vendor Specific Information <?>
	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [cc] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [13c] Virtual Channel <?>
	Capabilities: [160] Device Serial Number 00-1d-72-ff-fe-e6-19-d1
	Capabilities: [16c] Power Budgeting <?>
	Kernel driver in use: tg3
	Kernel modules: tg3

03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
	Subsystem: Foxconn International, Inc. Device e006
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at f4600000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [60] Express Legacy Endpoint, MSI 00
	Capabilities: [90] MSI-X: Enable- Count=1 Masked-
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel <?>
	Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
	Kernel driver in use: ath9k
	Kernel modules: ath9k

0d:06.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 01)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, stepping, slow devsel, latency 168, IRQ 22
	Memory at f4700000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=0d, secondary=0e, subordinate=11, sec-latency=176
	Memory window 0: 50000000-53fff000 (prefetchable)
	Memory window 1: 58000000-5bfff000
	I/O window 0: 00003000-000030ff
	I/O window 1: 00003400-000034ff
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

0d:06.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) (prog-if 01)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: bus master, slow devsel, latency 32, IRQ 22
	Memory at f4702000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci

0d:06.3 Mass storage controller: O2 Micro, Inc. Integrated MS/. Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 013c
	Flags: slow devsel, IRQ 11
	Memory at f4701000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [a0] Power Management version 2[/b]

comunque per il momento sto installando slackbuild per avere Gnome, non sono un amante del Kde... comunque l'ho connesso via cavo, pero sto scrivendo da un altro laptop.. Certo l'output arriva dal pc di Slack..

[Blallo]

ok la scheda viene perfettamente riconosciuta
hai provato ad usare wicd, presente nella /extra del dvd di installazione?
facilita molto le cose

per la tastiera, modifica da root i files /etc/profile.d/lang.sh e /etc/profile.d/lang.csh
scrivendo vicino a LANG in entrambi i casi
it_IT@euro

[mr.simo]

Si di questo gia ne ero completamente sicuro.. a parte che ci sto prendendo proprio la mano oggi con Slack ora vedro come installarlo, e non è la prima volta che sento che wicd è piu portabile... Per spulciare i pacchetti extra revisionero la docu che ho a portata di mano, vale il detto RTFM

Se me lo vuoi suggerire in anticipo ti ringrazio altrettanto comunque visto che mi risparmierebbe tempo.

Ok la questione della tastiera...

Intanto ti tingrazio ancora una volta per il supporto, vedro con wicd e faccio sapere..
Grazie!

Suggerimenti e consigli sono graditissimi..

[Blallo]

Si di questo gia ne ero completamente sicuro.. a parte che ci sto prendendo proprio la mano oggi con Slack ora vedro come installarlo, e non è la prima volta che sento che wicd è piu portabile... Per spulciare i pacchetti extra revisionero la docu che ho a portata di mano, vale il detto RTFM

Se me lo vuoi suggerire in anticipo ti ringrazio altrettanto comunque visto che mi risparmierebbe tempo.

comunque, vedo come finisce l'installazione di slackbuild, chissa che risolvo anche la questione della tastiera... Non so preferisco Gnome al Kde... questione di gusti..

Intanto ti tingrazio ancora una volta per il supporto, vedro con wicd e faccio sapere..
Grazie!

Suggerimenti e consigli sono graditissimi..

non capisco che dici..cosa potrei suggerirti?
inoltre non importa gnome o kde, quelle impostazioni cambiano la lingua a tutto il sistema, indipendentemente dal DE che usi

[mr.simo]

Suggerimenti e consigli era per dire, visto che è la prima volta che installo e mi metto con Slack...

Per il momento grazie... Ora vedro le docu..

[mohaa]

per la tastiera, modifica da root i files /etc/profile.d/lang.sh e /etc/profile.d/lang.csh
scrivendo vicino a LANG in entrambi i casi
it_IT@euro

lang.*sh per la tastiera ?

[Blallo]

uso XFCE, e con questa modifica mi ha automaticamente messo il layout
d'altronde credo sia quello il problema di configurazione della tastiera di cui parlava, a meno che non si trattasse dei tasti multimediali
in tal caso mi scuso per aver detto una cosa inutile

[navajo]

Per favore scrivere in italiano corretto, o almeno non usare codici da sms inoltre, usare il tag CODE quando si devono riportare output di qualsiasi tipo e lunghezza.
grazie

[danix]

uso XFCE, e con questa modifica mi ha automaticamente messo il layout
d'altronde credo sia quello il problema di configurazione della tastiera di cui parlava, a meno che non si trattasse dei tasti multimediali
in tal caso mi scuso per aver detto una cosa inutile

si vede che XFCE indovina in qualche modo il layout della tastiera che si avvicina alle impostazioni di lang.*sh... comunque per impostare la tastiera è necessario vedere prima quale DE/WM usi...

Giusto per chiarire, it_IT@euro va aggiunto al lang.sh, il lang.csh (se usi la shell csh) va modificato in it_IT senza @euro, e comunque se non usi csh puoi anche fare a meno di modificarlo...
In ogni caso questi files non impostano la tastiera, ma la lingua del sistema, ad esempio i programmi gtk usano questi files per determinare la lingua dei propri menu...

In kde per impostare la tastiera vai in Impostazioni di sistema --> Lingua e Paese


se hai bisogno chiedi pure...