# File: xorg.conf
<BR># File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
<BR>
<BR># Note by ATI: the below copyright notice is there for servicing possibly
<BR># pending third party rights on the file format and the instance of this file.
<BR>#
<BR># Copyright (c) 1999 by The XFree86 Project, Inc.
<BR>#
<BR># Permission is hereby granted, free of charge, to any person obtaining a
<BR># copy of this software and associated documentation files (the "Software"),
<BR># to deal in the Software without restriction, including without limitation
<BR># the rights to use, copy, modify, merge, publish, distribute, sublicense,
<BR># and/or sell copies of the Software, and to permit persons to whom the
<BR># Software is furnished to do so, subject to the following conditions:
<BR>#
<BR># The above copyright notice and this permission notice shall be included in
<BR># all copies or substantial portions of the Software.
<BR>#
<BR># THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
<BR># IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
<BR># FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
<BR># THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
<BR># WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
<BR># OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
<BR># SOFTWARE.
<BR>#
<BR># Except as contained in this notice, the name of the XFree86 Project shall
<BR># not be used in advertising or otherwise to promote the sale, use or other
<BR># dealings in this Software without prior written authorization from the
<BR># XFree86 Project.
<BR>#
<BR>
<BR># **********************************************************************
<BR># Refer to the XF86Config(4/5) man page for details about the format of
<BR># this file.
<BR># **********************************************************************
<BR>
<BR># **********************************************************************
<BR># DRI Section
<BR># **********************************************************************
<BR>Section "dri"
<BR># Access to OpenGL ICD is allowed for all users:
<BR> Mode 0666
<BR># Access to OpenGL ICD is restricted to a specific user group:
<BR># Group 100 # users
<BR># Mode 0660
<BR>EndSection
<BR>
<BR># **********************************************************************
<BR># Module section -- this section is used to specify
<BR># which dynamically loadable modules to load.
<BR># **********************************************************************
<BR>#
<BR>Section "Module"
<BR>
<BR># This loads the DBE extension module.
<BR>
<BR> Load "dbe" # Double buffer extension
<BR>
<BR># This loads the miscellaneous extensions module, and disables
<BR># initialisation of the XFree86-DGA extension within that module.
<BR> SubSection "extmod"
<BR> Option "omit xfree86-dga" # don´t initialise the DGA extension
<BR> EndSubSection
<BR>
<BR># This loads the Type1 and FreeType font modules
<BR> Load "type1"
<BR> Load "freetype"
<BR>
<BR># This loads the GLX module
<BR> Load "glx" # libglx.a
<BR> Load "dri" # libdri.a
<BR>
<BR>EndSection
<BR>
<BR># **********************************************************************
<BR># Files section. This allows default font and rgb paths to be set
<BR># **********************************************************************
<BR>
<BR>Section "Files"
<BR>
<BR># The location of the RGB database. Note, this is the name of the
<BR># file minus the extension (like ".txt" or ".db"). There is normally
<BR># no need to change the default.
<BR>
<BR> RgbPath "/usr/X11R6/lib/X11/rgb"
<BR>
<BR># Multiple FontPath entries are allowed (which are concatenated together),
<BR># as well as specifying multiple comma-separated entries in one FontPath
<BR># command (or a combination of both methods)
<BR>#
<BR># If you don´t have a floating point coprocessor and emacs, Mosaic or other
<BR># programs take long to start up, try moving the Type1 and Speedo directory
<BR># to the end of this list (or comment them out).
<BR>#
<BR>
<BR> FontPath "/usr/X11R6/lib/X11/fonts/local/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
<BR>
<BR># The module search path. The default path is shown here.
<BR>
<BR># ModulePath "/usr/X11R6/lib/modules"
<BR>
<BR>EndSection
<BR>
<BR># **********************************************************************
<BR># Server flags section.
<BR># **********************************************************************
<BR>
<BR>Section "ServerFlags"
<BR>
<BR># Uncomment this to cause a core dump at the spot where a signal is
<BR># received. This may leave the console in an unusable state, but may
<BR># provide a better stack trace in the core dump to aid in debugging
<BR>
<BR># Option "NoTrapSignals"
<BR>
<BR># Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
<BR># This allows clients to receive this key event.
<BR>
<BR># Option "DontZap"
<BR>
<BR># Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
<BR># sequences. This allows clients to receive these key events.
<BR>
<BR># Option "Dont Zoom"
<BR>
<BR># Uncomment this to disable tuning with the xvidtune client. With
<BR># it the client can still run and fetch card and monitor attributes,
<BR># but it will not be allowed to change them. If it tries it will
<BR># receive a protocol error.
<BR>
<BR># Option "DisableVidModeExtension"
<BR>
<BR># Uncomment this to enable the use of a non-local xvidtune client.
<BR>
<BR># Option "AllowNonLocalXvidtune"
<BR>
<BR># Uncomment this to disable dynamically modifying the input device
<BR># (mouse and keyboard) settings.
<BR>
<BR># Option "DisableModInDev"
<BR>
<BR># Uncomment this to enable the use of a non-local client to
<BR># change the keyboard or mouse settings (currently only xset).
<BR>
<BR># Option "AllowNonLocalModInDev"
<BR>
<BR>EndSection
<BR>
<BR># **********************************************************************
<BR># Input devices
<BR># **********************************************************************
<BR>
<BR># **********************************************************************
<BR># Core keyboard´s InputDevice section
<BR># **********************************************************************
<BR>
<BR>Section "InputDevice"
<BR>
<BR> Identifier "Keyboard1"
<BR> Driver "kbd"
<BR># For most OSs the protocol can be omitted (it defaults to "Standard").
<BR># When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
<BR># uncomment the following line.
<BR>
<BR># Option "Protocol" "Xqueue"
<BR>
<BR> Option "AutoRepeat" "500 30"
<BR>
<BR># Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
<BR># Option "Xleds" "1 2 3"
<BR>
<BR># Option "LeftAlt" "Meta"
<BR># Option "RightAlt" "ModeShift"
<BR>
<BR># To customise the XKB settings to suit your keyboard, modify the
<BR># lines below (which are the defaults). For example, for a non-U.S.
<BR># keyboard, you will probably want to use:
<BR># Option "XkbModel" "pc102"
<BR># If you have a US Microsoft Natural keyboard, you can use:
<BR># Option "XkbModel" "microsoft"
<BR>#
<BR># Then to change the language, change the Layout setting.
<BR># For example, a german layout can be obtained with:
<BR># Option "XkbLayout" "de"
<BR># or:
<BR># Option "XkbLayout" "de"
<BR># Option "XkbVariant" "nodeadkeys"
<BR>#
<BR># If you´d like to switch the positions of your capslock and
<BR># control keys, use:
<BR># Option "XkbOptions" "ctrl:swapcaps"
<BR>
<BR># These are the default XKB settings for XFree86
<BR># Option "XkbRules" "xfree86"
<BR># Option "XkbModel" "pc101"
<BR># Option "XkbLayout" "us"
<BR># Option "XkbVariant" ""
<BR># Option "XkbOptions" ""
<BR>
<BR># Option "XkbDisable"
<BR>
<BR> Option "XkbRules" "xfree86"
<BR> Option "XkbModel" "pc105"
<BR> Option "XkbLayout" "it"
<BR>
<BR>EndSection
<BR>
<BR>
<BR># **********************************************************************
<BR># Core Pointer´s InputDevice section
<BR># **********************************************************************
<BR>
<BR>Section "InputDevice"
<BR>
<BR># Identifier and driver
<BR>
<BR> Identifier "Mouse1"
<BR> Driver "mouse"
<BR> Option "Protocol" "ImPS/2"
<BR> Option "ZAxisMapping" "4 5"
<BR> Option "Device" "/dev/input/mice"
<BR>
<BR># When using XQUEUE, comment out the above two lines, and uncomment
<BR># the following line.
<BR>
<BR># Option "Protocol" "Xqueue"
<BR>
<BR># Baudrate and SampleRate are only for some Logitech mice. In
<BR># almost every case these lines should be omitted.
<BR>
<BR># Option "BaudRate" "9600"
<BR># Option "SampleRate" "150"
<BR>
<BR># Emulate3Buttons is an option for 2-button Microsoft mice
<BR># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
<BR>
<BR># Option "Emulate3Buttons"
<BR># Option "Emulate3Timeout" "50"
<BR>
<BR># ChordMiddle is an option for some 3-button Logitech mice
<BR>
<BR># Option "ChordMiddle"
<BR>
<BR>EndSection
<BR>
<BR>
<BR># **********************************************************************
<BR># Other input device sections
<BR># this is optional and is required only if you
<BR># are using extended input devices. This is for example only. Refer
<BR># to the XF86Config man page for a description of the options.
<BR># **********************************************************************
<BR>#
<BR># Section "InputDevice"
<BR># Identifier "Mouse2"
<BR># Driver "mouse"
<BR># Option "Protocol" "MouseMan"
<BR># Option "Device" "/dev/mouse2"
<BR># EndSection
<BR>#
<BR># Section "InputDevice"
<BR># Identifier "spaceball"
<BR># Driver "magellan"
<BR># Option "Device" "/dev/cua0"
<BR># EndSection
<BR>#
<BR># Section "InputDevice"
<BR># Identifier "spaceball2"
<BR># Driver "spaceorb"
<BR># Option "Device" "/dev/cua0"
<BR># EndSection
<BR>#
<BR># Section "InputDevice"
<BR># Identifier "touchscreen0"
<BR># Driver "microtouch"
<BR># Option "Device" "/dev/ttyS0"
<BR># Option "MinX" "1412"
<BR># Option "MaxX" "15184"
<BR># Option "MinY" "15372"
<BR># Option "MaxY" "1230"
<BR># Option "ScreenNumber" "0"
<BR># Option "ReportingMode" "Scaled"
<BR># Option "ButtonNumber" "1"
<BR># Option "SendCoreEvents"
<BR># EndSection
<BR>#
<BR># Section "InputDevice"
<BR># Identifier "touchscreen1"
<BR># Driver "elo2300"
<BR># Option "Device" "/dev/ttyS0"
<BR># Option "MinX" "231"
<BR># Option "MaxX" "3868"
<BR># Option "MinY" "3858"
<BR># Option "MaxY" "272"
<BR># Option "ScreenNumber" "0"
<BR># Option "ReportingMode" "Scaled"
<BR># Option "ButtonThreshold" "17"
<BR># Option "ButtonNumber" "1"
<BR># Option "SendCoreEvents"
<BR># EndSection
<BR>
<BR># **********************************************************************
<BR># Monitor section
<BR># **********************************************************************
<BR>
<BR># Any number of monitor sections may be present
<BR>
<BR>Section "Monitor"
<BR> Identifier "Monitor0"
<BR> HorizSync 35-90
<BR> VertRefresh 50-160
<BR> Option "DPMS"
<BR>
<BR># === mode lines based on GTF ===
<BR># VGA @ 100Hz
<BR># Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
<BR># SVGA @ 100Hz
<BR># Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
<BR># XVGA @ 100Hz
<BR># Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
<BR># 1152x864 @ 60Hz
<BR># Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
<BR># 1152x864 @ 85Hz
<BR># Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
<BR># 1152x864 @ 100Hz
<BR># Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
<BR># 1280x960 @ 75Hz
<BR># Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
<BR># 1280x960 @ 100Hz
<BR># Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
<BR># SXGA @ 100Hz
<BR># Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
<BR># SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
<BR># Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
<BR># 1600x1000 @ 60Hz
<BR># Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
<BR># 1600x1000 @ 75Hz
<BR># Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
<BR># 1600x1000 @ 85Hz
<BR># Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
<BR># 1600x1000 @ 100Hz
<BR># Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
<BR># 1600x1024 @ 60Hz
<BR># Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
<BR># 1600x1024 @ 75Hz
<BR># Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
<BR># 1600x1024 @ 76Hz
<BR># Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
<BR># 1600x1024 @ 85Hz
<BR># Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
<BR># 1920x1080 @ 60Hz
<BR># Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
<BR># 1920x1080 @ 75Hz
<BR># Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
<BR># 1920x1200 @ 60Hz
<BR># Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
<BR># 1920x1200 @ 75Hz
<BR># Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
<BR># 2048x1536 @ 60
<BR># Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
<BR># 2048x1536 @ 60
<BR># Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
<BR># 1400x1050 @ 60Hz M9 Laptop mode
<BR># ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
<BR># 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
<BR># Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
<BR># 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
<BR># Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
<BR>
<BR>EndSection
<BR>
<BR>
<BR># **********************************************************************
<BR># Graphics device section
<BR># **********************************************************************
<BR>
<BR># Any number of graphics device sections may be present
<BR>
<BR># Standard VGA Device:
<BR>
<BR>Section "Device"
<BR> Identifier "Standard VGA"
<BR> VendorName "Unknown"
<BR> BoardName "Unknown"
<BR>
<BR># The chipset line is optional in most cases. It can be used to override
<BR># the driver´s chipset detection, and should not normally be specified.
<BR>
<BR># Chipset "generic"
<BR>
<BR># The Driver line must be present. When using run-time loadable driver
<BR># modules, this line instructs the server to load the specified driver
<BR># module. Even when not using loadable driver modules, this line
<BR># indicates which driver should interpret the information in this section.
<BR>
<BR> Driver "vga"
<BR># The BusID line is used to specify which of possibly multiple devices
<BR># this section is intended for. When this line isn´t present, a device
<BR># section can only match up with the primary video device. For PCI
<BR># devices a line like the following could be used. This line should not
<BR># normally be included unless there is more than one video device
<BR># installed.
<BR>
<BR># BusID "PCI:0:10:0"
<BR>
<BR># VideoRam 256
<BR>
<BR># Clocks 25.2 28.3
<BR>
<BR>EndSection
<BR>
<BR># === ATI device section ===
<BR>
<BR>Section "Device"
<BR> Identifier "ATI Graphics Adapter"
<BR> Driver "fglrx"
<BR># ### generic DRI settings ###
<BR># === disable PnP Monitor ===
<BR> #Option "NoDDC"
<BR># === disable/enable XAA/DRI ===
<BR> Option "no_accel" "no"
<BR> Option "no_dri" "no"
<BR># === misc DRI settings ===
<BR> Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
<BR># ### FireGL DDX driver module specific settings ###
<BR># === Screen Management ===
<BR> Option "DesktopSetup" "0x00000000"
<BR> Option "MonitorLayout" "AUTO, AUTO"
<BR> Option "IgnoreEDID" "off"
<BR> Option "HSync2" "unspecified"
<BR> Option "VRefresh2" "unspecified"
<BR> Option "ScreenOverlap" "0"
<BR># === TV-out Management ===
<BR> Option "NoTV" "yes"
<BR> Option "TVStandard" "NTSC-M"
<BR> Option "TVHSizeAdj" "0"
<BR> Option "TVVSizeAdj" "0"
<BR> Option "TVHPosAdj" "0"
<BR> Option "TVVPosAdj" "0"
<BR> Option "TVHStartAdj" "0"
<BR> Option "TVColorAdj" "0"
<BR> Option "GammaCorrectionI" "0x00000000"
<BR> Option "GammaCorrectionII" "0x00000000"
<BR># === OpenGL specific profiles/settings ===
<BR> Option "Capabilities" "0x00000000"
<BR># === Video Overlay for the Xv extension ===
<BR> Option "VideoOverlay" "on"
<BR># === OpenGL Overlay ===
<BR># Note: When OpenGL Overlay is enabled, Video Overlay
<BR># will be disabled automatically
<BR> Option "OpenGLOverlay" "off"
<BR># === Center Mode (Laptops only) ===
<BR> Option "CenterMode" "off"
<BR># === Pseudo Color Visuals (8-bit visuals) ===
<BR> Option "PseudoColorVisuals" "off"
<BR># === QBS Management ===
<BR> Option "Stereo" "off"
<BR> Option "StereoSyncEnable" "1"
<BR># === FSAA Management ===
<BR> Option "FSAAEnable" "no"
<BR> Option "FSAAScale" "1"
<BR> Option "FSAADisableGamma" "no"
<BR> Option "FSAACustomizeMSPos" "no"
<BR> Option "FSAAMSPosX0" "0.000000"
<BR> Option "FSAAMSPosY0" "0.000000"
<BR> Option "FSAAMSPosX1" "0.000000"
<BR> Option "FSAAMSPosY1" "0.000000"
<BR> Option "FSAAMSPosX2" "0.000000"
<BR> Option "FSAAMSPosY2" "0.000000"
<BR> Option "FSAAMSPosX3" "0.000000"
<BR> Option "FSAAMSPosY3" "0.000000"
<BR> Option "FSAAMSPosX4" "0.000000"
<BR> Option "FSAAMSPosY4" "0.000000"
<BR> Option "FSAAMSPosX5" "0.000000"
<BR> Option "FSAAMSPosY5" "0.000000"
<BR># === Misc Options ===
<BR> Option "UseFastTLS" "0"
<BR> Option "BlockSignalsOnLock" "on"
<BR> Option "UseInternalAGPGART" "yes"
<BR> Option "ForceGenericCPU" "no"
<BR># BusID "PCI:1:0:1" # vendor=1002, device=496e
<BR> Screen 0
<BR>EndSection
<BR>
<BR># **********************************************************************
<BR># Screen sections
<BR># **********************************************************************
<BR>
<BR># Any number of screen sections may be present. Each describes
<BR># the configuration of a single screen. A single specific screen section
<BR># may be specified from the X server command line with the "-screen"
<BR># option.
<BR>Section "Screen"
<BR> Identifier "Screen0"
<BR> Device "ATI Graphics Adapter"
<BR> Monitor "Monitor0"
<BR> DefaultDepth 24
<BR> #Option "backingstore"
<BR>
<BR> Subsection "Display"
<BR> Depth 24
<BR> Modes "1280x1024" "1024x768" "800x600" "640x480"
<BR> ViewPort 0 0 # initial origin if mode is smaller than desktop
<BR># Virtual 1280 1024
<BR> EndSubsection
<BR>EndSection
<BR>
<BR># **********************************************************************
<BR># ServerLayout sections.
<BR># **********************************************************************
<BR>
<BR># Any number of ServerLayout sections may be present. Each describes
<BR># the way multiple screens are organised. A specific ServerLayout
<BR># section may be specified from the X server command line with the
<BR># "-layout" option. In the absence of this, the first section is used.
<BR># When now ServerLayout section is present, the first Screen section
<BR># is used alone.
<BR>
<BR>Section "ServerLayout"
<BR>
<BR># The Identifier line must be present
<BR> Identifier "Server Layout"
<BR>
<BR># Each Screen line specifies a Screen section name, and optionally
<BR># the relative position of other screens. The four names after
<BR># primary screen name are the screens to the top, bottom, left and right
<BR># of the primary screen.
<BR>
<BR> Screen "Screen0"
<BR>
<BR># Each InputDevice line specifies an InputDevice section name and
<BR># optionally some options to specify the way the device is to be
<BR># used. Those options include "CorePointer", "CoreKeyboard" and
<BR># "SendCoreEvents".
<BR>
<BR> InputDevice "Mouse1" "CorePointer"
<BR> InputDevice "Keyboard1" "CoreKeyboard"
<BR>
<BR>EndSection
<BR>
<BR>### EOF ###
<BR><br>