slacky.eu

Ok...
<BR>Ho un laptop Presario 700
<BR>
<BR><!-- BBCode Start --><I>01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) (rev 01)</I><!-- BBCode End -->
<BR>
<BR>Ora ho preso una delle tante guide su internet dove si parla di come giocare ``con la vostra S3`` ..etc..etc..
<BR>In ogni caso ho scaricato l´ultima versione sul cvs di xorg,drm e Mesa:
<BR><!-- BBCode Start --><I>
<BR>cvs -d:pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg login
<BR>cvs -z3 -d:pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg co xc
<BR>cvs -d:pserver:anonymous@cvs.freedesktop.org:/cvs/dri login
<BR>cvs -z3 -d:pserver:anonymous@cvs.freedesktop.org:/cvs/dri co drm
<BR>cvs -d:pserver:anonymous@cvs.freedesktop.org:/cvs/mesa login
<BR>cvs -z3 -d:pserver:anonymous@cvs.freedesktop.org:/cvs/mesa co Mesa
<BR></I><!-- BBCode End -->
<BR> e quindi la configurazione
<BR><!-- BBCode Start --><I>cd xc/config/cf
<BR>wget <a href="http://freedesktop.org/~fxkuehl/host.def" target="_blank" target="_new">http://freedesktop.org/~fxkuehl/host.def</a>
<BR></I><!-- BBCode End -->
<BR>quindi modifcato ...
<BR><!-- BBCode Start --><I>#define XF86CardDrivers savage</I><!-- BBCode End -->
<BR>
<BR><!-- BBCode Start --><I>make World
<BR>make install
<BR>ldconfig</I><!-- BBCode End -->
<BR>
<BR>Quindi passato al Mesa
<BR><!-- BBCode Start --><I>make linux-dri-x86
<BR>cp lib/*_dri.so /usr/X11R6/lib/modules/dri/
<BR></I><!-- BBCode End -->
<BR>
<BR>ed alla fine il drm
<BR><!-- BBCode Start --><I>
<BR>make
<BR>make DRM_MODULES="savage"
<BR>cp lib/*.ko /lib/modules/2.6.11/kernel/drivers/char/drm
<BR>depmod -a
<BR></I><!-- BBCode End -->
<BR>
<BR>Come risultato mi da che se si avvia il DRI praticamente mi storèia tutto il resto con evidenti blocchi di sistema etc... Per storpiato intendo che sparisce la barra delle finestre (c´è ma non si vede). Capita che faccio ls in un Terminal e non vedo l´output....etc...nzomma na cifeca..
<BR>
<BR>A qualcuno funziona con una savage?
<BR>Non capisco come si setta (manualmente) un monitor nel xorg.conf
<BR>
<BR>
<BR>Questo è il mio xorg.conf
<BR><!-- BBCode Quote Start --><TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font size=-1>Quote:</font><HR></TD></TR><TR><TD><FONT SIZE=-1><BLOCKQUOTE>
<BR>Section "ServerLayout"
<BR> #InputDevice "mouse3b"
<BR> Identifier "kyalay"
<BR> Screen 0 "Screen0" 0 0
<BR> InputDevice "touchpad"
<BR> InputDevice "usbmouse"
<BR> InputDevice "keyboard[it]" "CoreKeyboard"
<BR>EndSection
<BR>
<BR>Section "Files"
<BR> RgbPath "/usr/X11R6/lib/X11/rgb"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/local/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/CID/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
<BR> FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
<BR>EndSection
<BR>
<BR>Section "Module"
<BR> Load "xtt"#1
<BR> Load "glx"
<BR># dri module and GLcore
<BR> Load "dri"
<BR># This loads the DBE extension module.
<BR> Load "dbe" # Double buffer extension
<BR> Load "record"
<BR> Load "fbdevhw"
<BR> Load "type1"
<BR> Load "freetype"
<BR># Load "speedo"#1
<BR> Load "extmod"#1
<BR> Load "GLcore"#1
<BR> Load "synaptics"
<BR>EndSection
<BR>
<BR>Section "ServerFlags"
<BR># Option "EstimateSizesAggresively" "0"
<BR> Option "DefaultServerLayout" "kyalay"
<BR>EndSection
<BR>
<BR>Section "InputDevice"
<BR> Identifier "keyboard[it]"
<BR> Driver "kbd"
<BR> Option "XkbModel" "pc104"
<BR> Option "XkbLayout" "it"
<BR>EndSection
<BR>
<BR>Section "InputDevice"
<BR> Identifier "touchpad"
<BR> Driver "synaptics"
<BR> Option "CorePointer" "true"
<BR> Option "Device" "/dev/psaux"
<BR> Option "Protocol" "auto-dev"
<BR> Option "LeftEdge" "1700"
<BR> Option "RightEdge" "5300"
<BR> Option "TopEdge" "1700"
<BR> Option "BottomEdge" "4200"
<BR> Option "FingerLow" "25"
<BR> Option "FingerHigh" "30"
<BR> Option "MaxTapTime" "180"
<BR> Option "MaxTapMove" "220"
<BR> Option "VertScrollDelta" "100"
<BR> Option "MinSpeed" "0.06"
<BR> Option "MaxSpeed" "0.12"
<BR> Option "AccelFactor" "0.0010"
<BR> Option "SHMConfig" "on"
<BR> Option "EmulateMidButtonTime" "75"
<BR> Option "Repeater" "/dev/ps2mouse"
<BR>EndSection
<BR>
<BR>Section "InputDevice"
<BR> Identifier "usbmouse"
<BR> Driver "mouse"
<BR> Option "Device" "/dev/mouse"
<BR> Option "Protocol" "IMPS/2"
<BR> Option "Buttons" "3"
<BR> Option "ZAxisMapping" "4 5"
<BR> Option "SendCoreEvents" "true"
<BR>EndSection
<BR>
<BR>Section "Monitor"
<BR> Identifier "My Monitor"
<BR> VendorName "Compaq"
<BR> ModelName "LCD Panel 1024x768"
<BR> HorizSync 31.5 - 70.0
<BR> HorizSync 31.5 - 70.0
<BR> VertRefresh 40.0 - 90.0
<BR> VertRefresh 40.0 - 90.0
<BR> ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
<BR> ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
<BR>EndSection
<BR>
<BR>Section "Device"
<BR> Identifier "S3"
<BR> Driver "savage"
<BR> VendorName "Videocard vendor"
<BR> BoardName "S3 ProSavage KN133"
<BR># ChipSet "ProSavage KN133"
<BR> VideoRam 32768
<BR> Option "hwcursor" "1"
<BR> Option "accel" "1"
<BR> Option "usebios" "1"
<BR> Option "DPMS" "on"
<BR> Option "backingstore"
<BR> BusID "PCI:01:0:0"
<BR>EndSection
<BR>
<BR>Section "Screen"
<BR> Identifier "Screen0"
<BR> Device "S3"
<BR> Monitor "My Monitor"
<BR> DefaultDepth 24
<BR> SubSection "Display"
<BR> Depth 24
<BR> Black 0x0000 0x0000 0x0000
<BR> White 0x0000 0x0000 0x0000
<BR> Modes "1024x768"
<BR> EndSubSection
<BR>EndSection
<BR>
<BR>Section "DRI"
<BR> Mode 0666
<BR>EndSection
<BR>
<BR></BLOCKQUOTE></FONT></TD></TR><TR><TD><HR></TD></TR></TABLE><!-- BBCode Quote End -->
<BR>
<BR>
<BR><br>

&nameGuarda qui, ho scritto qualcosa tempo fa...
<BR><!-- BBCode Start --><A HREF="http://www.slacky.it/modules.php?mop=mo ... 83&forum=1" TARGET="_blank">S3Savage</A><!-- BBCode End -->
<BR>se non ricordo male c´era un link ad un sito con gli ultimi driver s3...
<BR>
<BR><BR><BR>[ Questo Messaggio è stato Modificato da: wasabi il 02-03-2005 19:55 ]<br>

Qualcosa l´ho trovata negli howto, ma quel link mi porta ad una pag. con un modulo disabilitato (PHPnuke)...
<BR>Adesso do un´occhiata tnx<br>