slacky.eu

Sto cercando di configurare la slacky 12 per il mio notebook hp nx9105 ed incontro alcuni problemi con la scheda audio. La scheda è integrata ed ha un driver win xp adi1981b, è stata perfettamente riconosciuta da kubuntu, sulla slacky invece, penso proprio per la mia attuale incompetenza, non capisco se è stata riconosciuta ed inoltre il tasto esterno di "mute" rimane sempre commutato, quando lo premo compare sulla consolle il segno "~".

...posta il risultato del comando;

lscpi -v

Comunque il tuo portatile è funzionante con una Mandriva 2007 come visibile qui;

http://www.elektronist.com/linux/kurulu ... x9105.html

...unico "problema"; il sito è in scritto in Turco. ....tutto sommato andando ad intuito....io non ci capsico lo stesso nulla

...la scheda audio integrata è quella riporta nel link che ti ho indicato, ovvero una;

00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)

giusto?

Bye

Ma hai già provato con alsaconf?

Non ho ancora provato alsaconf, purtroppo ora non ho il notebook con me, stasera provo....
Nei prossimi giorni vi faccio conoscere i risultati. Grazie

Ciao, ho lanciato alsaconf, l'audio adesso è operativo, ma i tre pulsanti per la regolazione ancora non funzionano, vi trasmetto di seguito il risultato di lspci -v

00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [c0] AGP version 2.0

00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
Subsystem: nVidia Corporation Unknown device 0c80
Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
Subsystem: Hewlett-Packard Company Unknown device 006d
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 2040
I/O ports at 2000
Capabilities: [44] Power Management version 2

00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Unknown device 0c80
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at e8000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Unknown device 0c80
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
Memory at e8001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Unknown device 0c80
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
Memory at e8004000 (32-bit, non-prefetchable)
Capabilities: [80] Power Management version 2

00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
Subsystem: Hewlett-Packard Company Unknown device 006d
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
I/O ports at 1400
I/O ports at 1c00
Memory at e8002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:06.1 Modem: nVidia Corporation nForce3 Audio (rev a2) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Unknown device 006d
Flags: 66MHz, fast devsel, IRQ 18
I/O ports at 1800
I/O ports at 1c80
Memory at e8003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a [Master SecP PriP])
Subsystem: nVidia Corporation Unknown device 0c80
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at 2080 [size=16]
Capabilities: [44] Power Management version 2

00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=0a, sec-latency=128
I/O behind bridge: 00003000-00007fff
Memory behind bridge: e8100000-e97fffff
Prefetchable memory behind bridge: 60000000-67ffffff

00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: ea000000-eaffffff
Prefetchable memory behind bridge: f8000000-fc0fffff

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel

01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go 32M] (rev a3) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device 006d
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 21
Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Memory at fc000000 (32-bit, prefetchable) [size=512K]
[virtual] Expansion ROM at fc080000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0

02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 006d
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at e8108000 (32-bit, non-prefetchable) [size=2K]
Memory at e8100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2

02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Hewlett-Packard Company Unknown device 006b
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at 7000 [size=256]
Memory at e8108800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Subsystem: Hewlett-Packard Company NX9500 Built-in Wireless
Flags: bus master, fast devsel, latency 64, IRQ 22
Memory at e8104000 (32-bit, non-prefetchable) [size=8K]

02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 006d
Flags: bus master, medium devsel, latency 168, IRQ 16
Memory at e8106000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 60000000-63fff000 (prefetchable)
Memory window 1: e8400000-e87ff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
16-bit legacy interface ports at 0001

02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 006d
Flags: bus master, medium devsel, latency 168, IRQ 17
Memory at e8107000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 64000000-67fff000 (prefetchable)
Memory window 1: e8c00000-e8fff000
I/O window 0: 00003800-000038ff
I/O window 1: 00003c00-00003cff
16-bit legacy interface ports at 0001

02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 006d
Flags: bus master, medium devsel, latency 64
I/O ports at 7400 [size=64]
Capabilities: [44] Power Management version 2


Se vedete qualcosa di strano fatemelo sapere.
Esiste qualcosa per compilare il kernel ottimale per la scheda madre?

photolastic ha scritto:Esiste qualcosa per compilare il kernel ottimale per la scheda madre?

Bisogna appunto... ricompilarselo! Non esiste un metodo automatico, se è quello che chiedevi. Su Slacky c'è tutto il necessario (anche di più):
http://www.slacky.eu/wikislack/index.ph ... _Slackware
http://www.slacky.eu/wikislack/index.ph ... Menuconfig
Per quanto riguarda i tasti speciali della tastiera credo ci voglia un programma per farli riconoscere... prova a cercare nei vecchi topic.
Se vuoi imparare Slackware ti devi leggere questo http://www.slacky.eu/index.php?option=c ... &Itemid=42.