connessione wi-fi

[inux]

ciao a tutti, il quesito è questo:essendomi appena sposato ho cambiato casa e modem attualmente ho quello dell'infostrada dlink con connessione wireless, la connessione sul fisso funziona "vista" installato, sul mio portatile acer aspire 1362 non so come fare mi potete dare una mano grazie. Con la connessione via cavo va bene però vorrei farla senza fili ciao.

[SIV]

Usi Kde e quindi Network Management?
Se sì, collegati via cavo, installa wicd(lo trovi qui su slacky) e prova con quello.

[zxzxasas]

wicd ora è anche un pacchetto ufficiale di Slackware.
lo trovi in /extra

[slucky]

prima di tutto auguri per il matrimonio!
per quanto riguarda il wi-fi su slackware, il file di riferimento per tutti i settaggi è /etc/rc.d/rc.inet1.conf comunque ti invito a leggere la guida di Conraid per ogni eventuale delucidazione in merito:

http://www.slackers.it/configurare-le-s ... slackware/

[inux]

grazie a tutti vado a vedere ciao

[inux]

ho fatto tutto, credo ma su iwconfig mi esce questo:

root@darkstar:/home/christian# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

ppp0 no wireless extensions.

non so come fare qualche consiglio?

[slucky]

ma la scheda viene riconosciuta dal sistema? posta l'output dei comandi lspci -n è ifconfig -a

[inux]

scusate per l'assenza i comandi da te dati mi danno:

Codice: Seleziona tutto

root@darkstar:/home/christian# lspci -n
00:00.0 0600: 1106:0204
00:00.1 0600: 1106:1204
00:00.2 0600: 1106:2204
00:00.3 0600: 1106:3204
00:00.4 0600: 1106:4204
00:00.7 0600: 1106:7204
00:01.0 0604: 1106:b188
00:0b.0 0607: 104c:ac8e
00:0b.1 0607: 104c:ac8e
00:0b.2 0c00: 104c:802e
00:10.0 0c03: 1106:3038 (rev 80)
00:10.1 0c03: 1106:3038 (rev 80)
00:10.2 0c03: 1106:3038 (rev 80)
00:10.3 0c03: 1106:3104 (rev 82)
00:11.0 0601: 1106:3177
00:11.1 0101: 1106:0571 (rev 06)
00:11.5 0401: 1106:3059 (rev 50)
00:11.6 0780: 1106:3068 (rev 80)
00:12.0 0200: 1106:3065 (rev 74)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 1106:3108 (rev 01)
root@darkstar:/home/christian# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:0a:e4:5f:98:88
          inet6 addr: fe80::20a:e4ff:fe5f:9888/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:29175 errors:0 dropped:0 overruns:0 frame:0
          TX packets:24753 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:16813581 (16.0 MiB)  TX bytes:2950142 (2.8 MiB)
          Interrupt:23 Base address:0x4c00

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ppp0      Link encap:Point-to-Point Protocol
          inet addr:151.15.193.51  P-t-P:151.6.151.72  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:29134 errors:0 dropped:0 overruns:0 frame:0
          TX packets:24713 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:16168868 (15.4 MiB)  TX bytes:2404896 (2.2 MiB)

. Non capisco la scheda wireless non la legge cosa devo fare?

[slucky]

ok, la scheda non viene rilevata, per capire di che tipo di scheda si tratti, installa il pacchetto lshw che trovi qui su slacky.eu e poi dai il comando, ti elencherà tutto l'hardware del tuo sistema, schede di rete comprese,una volta capito il modello...
si tratterà di vedere se per attivarla bisogna caricare il rispettivo modulo nel kernel, se c'è bisogno di ndiswrapper oppure manchi il firmware ecc..ecc...

[Ansa89]

Ma tu stai cercando di configurare la scheda wireless interna al portatile?

[inux]

in teoria si vorrei configurare la scheda interna se è possibile, per il momento seguo quello che ha detto slucky poi ci risentiamo quando so qualche cosa. ciao

[inux]

Slucky a detto:

installa il pacchetto lshw che trovi qui su slacky.eu e poi dai il comando, ti elencherà tutto l'hardware del tuo sistema,

l'ho fatto posto il risultato:

Codice: Seleziona tutto

root@darkstar:/home/christian# lshw
PCI (sysfs)
darkstar
    description: Computer
    product: Aspire 1360
    vendor: Acer
    version: -1
    serial: LXA3605238445C1D97M000
    width: 32 bits
    capabilities: smbios-2.3 dmi-2.3 smp-1.4 smp
    configuration: administrator_password=enabled boot=oem-specific cpus=1 frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=1599B560-2EC3-11D9-A270-992734187A03
  *-core
       description: Motherboard
       product: Aspire 1360
       vendor: Acer
       physical id: 0
       version: Rev.A
       serial: LXA3605238445C1D97M000
     *-firmware
          description: BIOS
          vendor: Phoenix
          physical id: 0
          version: V1.08 (10/12/2004)
          size: 111KiB
          capacity: 448KiB
          capabilities: isa pci pcmcia pnp apm upgrade shadowing escd usb smartbattery biosbootspecification
     *-cpu
          description: CPU
          product: Mobile AMD Sempron(tm) Processor 2800+
          vendor: Advanced Micro Devices [AMD]
          physical id: 4
          bus info: cpu@0
          version: 15.8.2
          slot: Socket 754
          size: 1600MHz
          capacity: 2500MHz
          width: 32 bits
          clock: 800MHz
          capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext 3dnowext 3dnow up
        *-cache:0
             description: L1 cache
             physical id: 8
             slot: L1 Cache
             size: 128KiB
             capabilities: asynchronous internal write-back
        *-cache:1
             description: L2 cache
             physical id: 9
             slot: L2 Cache
             size: 256KiB
             capacity: 1MiB
             capabilities: synchronous external write-through
     *-memory
          description: System Memory
          physical id: 21
          slot: System board or motherboard
          size: 768MiB
        *-bank:0
             description: DIMM DRAM Synchronous
             physical id: 0
             slot: S1
             size: 256MiB
             width: 32 bits
        *-bank:1
             description: DIMM DRAM Synchronous
             physical id: 1
             slot: S2
             size: 512MiB
             width: 32 bits
     *-pci:0
          description: Host bridge
          product: K8M800 Host Bridge
          vendor: VIA Technologies, Inc.
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 00
          width: 32 bits
          clock: 66MHz
          configuration: driver=agpgart-amd64 latency=8
          resources: irq:0 memory:e0000000-efffffff(prefetchable)
        *-pci
             description: PCI bridge
             product: VT8237 PCI bridge [K8T800/K8T890 South]
             vendor: VIA Technologies, Inc.
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pci pm normal_decode bus_master cap_list
             resources: memory:d1000000-d1ffffff memory:f0000000-f3ffffff(prefetchable)
           *-display UNCLAIMED
                description: VGA compatible controller
                product: K8M800/K8N800/K8N800A [S3 UniChrome Pro]
                vendor: VIA Technologies, Inc.
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 01
                width: 32 bits
                clock: 66MHz
                capabilities: pm agp agp-3.0 vga_controller bus_master cap_list
                configuration: latency=64 mingnt=2
                resources: memory:f0000000-f3ffffff(prefetchable) memory:d1000000-d1ffffff
        *-pcmcia:0
             description: CardBus bridge
             product: PCI7420 CardBus Controller
             vendor: Texas Instruments
             physical id: b
             bus info: pci@0000:00:0b.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pcmcia bus_master cap_list
             configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192
             resources: irq:17 memory:50000000-50000fff ioport:2000(size=256) ioport:2400(size=256) memory:40000000-43ffffff(prefetchable) memory:44000000-47ffffff
        *-pcmcia:1
             description: CardBus bridge
             product: PCI7420 CardBus Controller
             vendor: Texas Instruments
             physical id: b.1
             bus info: pci@0000:00:0b.1
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pcmcia bus_master cap_list
             configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192
             resources: irq:18 memory:50001000-50001fff ioport:2800(size=256) ioport:2c00(size=256) memory:48000000-4bffffff(prefetchable) memory:4c000000-4fffffff
        *-firewire
             description: FireWire (IEEE 1394)
             product: PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
             vendor: Texas Instruments
             physical id: b.2
             bus info: pci@0000:00:0b.2
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pm ohci bus_master cap_list
             configuration: driver=ohci1394 latency=64 maxlatency=4 mingnt=2
             resources: irq:19 memory:d0005000-d00057ff memory:d0000000-d0003fff
        *-usb:0
             description: USB Controller
             product: VT82xxxxx UHCI USB 1.1 Controller
             vendor: VIA Technologies, Inc.
             physical id: 10
             bus info: pci@0000:00:10.0
             version: 80
             width: 32 bits
             clock: 33MHz
             capabilities: pm uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=64
             resources: irq:21 ioport:1c00(size=32)
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.27.7-smp uhci_hcd
                physical id: 1
                bus info: usb@2
                logical name: usb2
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub slots=2 speed=12.0MB/s
        *-usb:1
             description: USB Controller
             product: VT82xxxxx UHCI USB 1.1 Controller
             vendor: VIA Technologies, Inc.
             physical id: 10.1
             bus info: pci@0000:00:10.1
             version: 80
             width: 32 bits
             clock: 33MHz
             capabilities: pm uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=64
             resources: irq:21 ioport:1c20(size=32)
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.27.7-smp uhci_hcd
                physical id: 1
                bus info: usb@3
                logical name: usb3
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub slots=2 speed=12.0MB/s
              *-usb
                   description: Mouse
                   product: PS/2+USB Mouse
                   vendor: Elan Microelectronics Corp.
                   physical id: 2
                   bus info: usb@3:2
                   version: 51.25
                   capabilities: usb-1.10
                   configuration: driver=usbhid maxpower=100mA speed=1.5MB/s
        *-usb:2
             description: USB Controller
             product: VT82xxxxx UHCI USB 1.1 Controller
             vendor: VIA Technologies, Inc.
             physical id: 10.2
             bus info: pci@0000:00:10.2
             version: 80
             width: 32 bits
             clock: 33MHz
             capabilities: pm uhci bus_master cap_list
             configuration: driver=uhci_hcd latency=64
             resources: irq:21 ioport:1c40(size=32)
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.27.7-smp uhci_hcd
                physical id: 1
                bus info: usb@4
                logical name: usb4
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub slots=2 speed=12.0MB/s
        *-usb:3
             description: USB Controller
             product: USB 2.0
             vendor: VIA Technologies, Inc.
             physical id: 10.3
             bus info: pci@0000:00:10.3
             version: 82
             width: 32 bits
             clock: 33MHz
             capabilities: pm ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=64
             resources: irq:21 memory:d0005800-d00058ff
           *-usbhost
                product: EHCI Host Controller
                vendor: Linux 2.6.27.7-smp ehci_hcd
                physical id: 1
                bus info: usb@1
                logical name: usb1
                version: 2.06
                capabilities: usb-2.00
                configuration: driver=hub slots=6 speed=480.0MB/s
        *-isa
             description: ISA bridge
             product: VT8235 ISA Bridge
             vendor: VIA Technologies, Inc.
             physical id: 11
             bus info: pci@0000:00:11.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: isa pm bus_master cap_list
             configuration: latency=0
        *-ide
             description: IDE interface
             product: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
             vendor: VIA Technologies, Inc.
             physical id: 11.1
             bus info: pci@0000:00:11.1
             version: 06
             width: 32 bits
             clock: 33MHz
             capabilities: ide pm bus_master cap_list
             configuration: driver=VIA_IDE latency=64
             resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:1c60(size=16)
           *-ide:0
                description: IDE Channel 0
                physical id: 0
                bus info: ide@0
                logical name: ide0
                clock: 33MHz
              *-disk
                   description: ATA Disk
                   product: HTS424030M9AT00
                   vendor: Hitachi
                   physical id: 0
                   bus info: ide@0.0
                   logical name: /dev/hda
                   version: MAAOA71A
                   serial: MPAA41QBC819DA
                   size: 27GiB (30GB)
                   capacity: 27GiB (30GB)
                   capabilities: ata dma lba iordy smart security pm apm partitioned partitioned:dos
                   configuration: apm=off mode=udma5 signature=34fe34fd smart=on
                 *-volume:0
                      description: EXT3 volume
                      vendor: Linux
                      physical id: 1
                      bus info: ide@0.0,1
                      logical name: /dev/hda1
                      logical name: /
                      version: 1.0
                      serial: 940d9e2e-42a8-4c04-a1f0-7284ce3f0c19
                      size: 26GiB
                      capacity: 26GiB
                      capabilities: primary bootable journaled extended_attributes large_files ext3 ext2 initialized
                      configuration: created=2009-07-20 18:42:24 filesystem=ext3 modified=2009-07-21 18:13:21 mount.fstype=ext3 mount.options=rw,errors=continue,data=ordered mounted=2009-07-21 17:55:18 state=mounted
                 *-volume:1
                      description: Extended partition
                      physical id: 2
                      bus info: ide@0.0,2
                      logical name: /dev/hda2
                      size: 1223MiB
                      capacity: 1223MiB
                      capabilities: primary extended partitioned partitioned:extended
                    *-logicalvolume
                         description: Linux swap / Solaris partition
                         physical id: 5
                         logical name: /dev/hda5
                         capacity: 1223MiB
                         capabilities: nofs
           *-ide:1
                description: IDE Channel 1
                physical id: 1
                bus info: ide@1
                logical name: ide1
                clock: 33MHz
              *-cdrom
                   description: DVD writer
                   product: QSI DVDRW SDW-042
                   physical id: 0
                   bus info: ide@1.0
                   logical name: /dev/hdc
                   version: DX76
                   capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio cd-r cd-rw dvd dvd-r
                   configuration: mode=udma2 status=nodisc
        *-multimedia
             description: Multimedia audio controller
             product: VT8233/A/8235/8237 AC97 Audio Controller
             vendor: VIA Technologies, Inc.
             physical id: 11.5
             bus info: pci@0000:00:11.5
             version: 50
             width: 32 bits
             clock: 33MHz
             capabilities: pm cap_list
             configuration: driver=VIA 82xx Audio latency=0
             resources: irq:22 ioport:1000(size=256)
        *-communication UNCLAIMED
             description: Communication controller
             product: AC'97 Modem Controller
             vendor: VIA Technologies, Inc.
             physical id: 11.6
             bus info: pci@0000:00:11.6
             version: 80
             width: 32 bits
             clock: 33MHz
             capabilities: pm cap_list
             configuration: latency=0
             resources: ioport:1400(size=256)
        *-network
             description: Ethernet interface
             product: VT6102 [Rhine-II]
             vendor: VIA Technologies, Inc.
             physical id: 12
             bus info: pci@0000:00:12.0
             logical name: eth0
             version: 74
             serial: 00:0a:e4:5f:98:88
             size: 100MB/s
             capacity: 100MB/s
             width: 32 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
             configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.4.3 duplex=full latency=64 link=yes maxlatency=8 mingnt=3 multicast=yes port=MII speed=100MB/s
             resources: irq:23 ioport:1800(size=256) memory:d0005c00-d0005cff
     *-pci:1
          description: Host bridge
          product: K8M800 Host Bridge
          vendor: VIA Technologies, Inc.
          physical id: 101
          bus info: pci@0000:00:00.1
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:2
          description: Host bridge
          product: K8M800 Host Bridge
          vendor: VIA Technologies, Inc.
          physical id: 102
          bus info: pci@0000:00:00.2
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:3
          description: Host bridge
          product: K8M800 Host Bridge
          vendor: VIA Technologies, Inc.
          physical id: 103
          bus info: pci@0000:00:00.3
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:4
          description: Host bridge
          product: K8M800 Host Bridge
          vendor: VIA Technologies, Inc.
          physical id: 104
          bus info: pci@0000:00:00.4
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:5
          description: Host bridge
          product: K8M800 Host Bridge
          vendor: VIA Technologies, Inc.
          physical id: 105
          bus info: pci@0000:00:00.7
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:6
          description: Host bridge
          product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
          vendor: Advanced Micro Devices [AMD]
          physical id: 106
          bus info: pci@0000:00:18.0
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:7
          description: Host bridge
          product: K8 [Athlon64/Opteron] Address Map
          vendor: Advanced Micro Devices [AMD]
          physical id: 107
          bus info: pci@0000:00:18.1
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:8
          description: Host bridge
          product: K8 [Athlon64/Opteron] DRAM Controller
          vendor: Advanced Micro Devices [AMD]
          physical id: 108
          bus info: pci@0000:00:18.2
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:9
          description: Host bridge
          product: K8 [Athlon64/Opteron] Miscellaneous Control
          vendor: Advanced Micro Devices [AMD]
          physical id: 109
          bus info: pci@0000:00:18.3
          version: 00
          width: 32 bits
          clock: 33MHz
          configuration: driver=k8temp
          resources: irq:0

mi fate sapere che significa io non vedo nessuna voce.

[slucky]

infatti il tuo portatile non ha schede di rete di tipo wi-fi (es. broadcom), solo la classica scheda di rete di tipo ethernet, quindi per collegarti via wi-fi devi procurarti un pennino di tipo usb o una scheda pci, ti conviene acquistarne uno che sia supportato dal kernel, io uso un digicom che utilizza i driver zd1211, qui trovi un'elenco di modelli supportati nativamente da linux :

http://linuxwireless.org/en/users/Devices/USB

[inux]

ti ringrazio la compro poi mi faccio risentire ciao.

[inux]

ciao, ho comprato la penna usb e ho gia problemi. Come la inserisco il pc si surriscalda e si spegne per l'eccessiva temperatura che devo fare?