nero 6

[pol]

c'è qualche cosa che non va

root@darkstar:~# xhost +
xhost: unable to open display ""

[Paoletta]

a questo punto fai:

Codice: Seleziona tutto

DISPLAY=:0.0
export DISPLAY
xhost +
su -c /opt/kde/bin/k3b

[napoleone1981]

Apri k3b da utente normale... vai a Impostazioni->Impostazioni k3b. Metti la password di root. Seleziona usa gruppo burning. Applica. Così dovrebbe andare.
Inoltre se ti scarichi l'ultima versione, all'avvio ti dice quale è il problema...

[pol]

a questo punto fai:

Codice: Seleziona tutto

DISPLAY=:0.0
export DISPLAY
xhost +
su -c /opt/kde/bin/k3b

mi da un sacco di errori

root@darkstar:~# DISPLAY=:0.0
root@darkstar:~# export DISPLAY
root@darkstar:~# xhost +
access control disabled, clients can connect from any host
root@darkstar:~# su -c /opt/kde/bin/k3b
root@darkstar:~# k3b: (K3bExternalBinManager) Cdrecord 2.1 features: gracetime, overburn, cdtext, clone, tao, cuefile, xamix, plain-atapi, hacked-atapi
k3b: (K3bExternalBinManager) 2 1 -1 seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
k3b: (K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
k3b: /dev/hdc resolved to /dev/hdc
k3b: /dev/hdc is block device (0)
k3b: /dev/hdc seems to be cdrom
k3b: (K3bDevice::Device) /dev/hdc: init()
k3b: (K3bDevice::Device) /dev/hdc feature: CD Mastering
k3b: (K3bDevice::Device) /dev/hdc feature: CD Track At Once
k3b: (K3bDevice::Device) /dev/hdc feature: CD-RW Media Write Support
k3b: (K3bDevice::Device) /dev/hdc feature: DVD Read
k3b: (K3bDevice::Device) /dev/hdc feature: DVD+R
k3b: (K3bDevice::Device) /dev/hdc feature: DVD+RW
k3b: (K3bDevice::Device) /dev/hdc feature: DVD+R Double Layer
k3b: (K3bDevice::Device) /dev/hdc feature: DVD-R/-RW Write
k3b: (K3bDevice::Device) /dev/hdc feature: Rigid Restricted Overwrite
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: GET CONFIGURATION (46)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: (K3bDevice::Device) /dev/hdc unknown profile: 2
k3b: (K3bDevice::Device) /dev/hdc: dataLen: 60
k3b: (K3bDevice::Device) /dev/hdc: checking for TAO
k3b: (K3bDevice::Device) /dev/hdc: checking for SAO
k3b: (K3bDevice::Device) /dev/hdc: checking for SAO_R96P
k3b: (K3bDevice::Device) /dev/hdc: checking for SAO_R96R
k3b: (K3bDevice::Device) /dev/hdc: checking for RAW_R16
k3b: (K3bDevice::Device) /dev/hdc: checking for RAW_R96P
k3b: (K3bDevice::Device) /dev/hdc: checking for RAW_R96R
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: READ DVD STRUCTURE (ad)
k3b: errorcode: 70
k3b: sense key: NOT READY (2)
k3b: asc: 3a
k3b: ascq: 0
k3b: (K3bDevice::Device) /dev/hdc: READ DVD STRUCTURE length det failed
k3b: (K3bDevice::Device) /dev/hdc: Number of supported write speeds via 2A: 6
k3b: (K3bDevice::Device) /dev/hdc : 7056 KB/s
k3b: (K3bDevice::Device) /dev/hdc : 5645 KB/s
k3b: (K3bDevice::Device) /dev/hdc : 4234 KB/s
k3b: (K3bDevice::Device) /dev/hdc : 2822 KB/s
k3b: (K3bDevice::Device) /dev/hdc : 1411 KB/s
k3b: (K3bDevice::Device) /dev/hdc : 706 KB/s
k3b: (K3bDevice::DeviceManager) setting current write speed of device /dev/hdc to 7056
k3b: (K3bDevice::DeviceManager) Link: /dev/cdrom -> /dev/hdc
k3b: (K3bDevice::DeviceManager) Link: /dev/dvd -> /dev/hdc
k3b: (K3bDevice::DeviceManager) Link: /dev/cdrw -> /dev/hdc
k3b: (K3bDevice::DeviceManager) SCANNING FOR GENERIC DEVICES.
k3b: (K3bDevice::Device) Error: could not open device /dev/sg0for reading
k3b: could not open device /dev/sg0 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg1for reading
k3b: could not open device /dev/sg1 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg2for reading
k3b: could not open device /dev/sg2 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg3for reading
k3b: could not open device /dev/sg3 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg4for reading
k3b: could not open device /dev/sg4 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg5for reading
k3b: could not open device /dev/sg5 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg6for reading
k3b: could not open device /dev/sg6 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg7for reading
k3b: could not open device /dev/sg7 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg8for reading
k3b: could not open device /dev/sg8 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg9for reading
k3b: could not open device /dev/sg9 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg10for reading
k3b: could not open device /dev/sg10 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg11for reading
k3b: could not open device /dev/sg11 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg12for reading
k3b: could not open device /dev/sg12 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg13for reading
k3b: could not open device /dev/sg13 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg14for reading
k3b: could not open device /dev/sg14 (No such device)
k3b: (K3bDevice::Device) Error: could not open device /dev/sg15for reading
k3b: could not open device /dev/sg15 (No such device)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/hda5
k3b: /dev/hda5 resolved to /dev/hda5
k3b: /dev/hda5 is block device (5)
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: INQUIRY (12)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/hda1
k3b: /dev/hda1 resolved to /dev/hda1
k3b: /dev/hda1 is block device (1)
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: INQUIRY (12)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/hda6
k3b: /dev/hda6 resolved to /dev/hda6
k3b: /dev/hda6 is block device (6)
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: INQUIRY (12)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/cdrom
k3b: (K3bDevice::DeviceManager) found device for /dev/cdrom: /dev/hdc
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/hdc
k3b: (K3bDevice::DeviceManager) found device for /dev/hdc: /dev/hdc
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/fd0
k3b: /dev/fd0 resolved to /dev/fd0
k3b: /dev/fd0 is block device (0)
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: INQUIRY (12)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: (K3bDevice::DeviceManager) scanning fstab: devpts
k3b: Could not resolve devpts
k3b: (K3bDevice::Device) Error: could not open device devptsfor reading
k3b: could not open device devpts (No such file or directory)
k3b: Could not resolve devpts
k3b: devpts resolved to devpts
k3b: (K3bDevice::Device) Error: could not open device devptsfor reading
k3b: could not open device devpts (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: proc
k3b: Could not resolve proc
k3b: (K3bDevice::Device) Error: could not open device procfor reading
k3b: could not open device proc (No such file or directory)
k3b: Could not resolve proc
k3b: proc resolved to proc
k3b: (K3bDevice::Device) Error: could not open device procfor reading
k3b: could not open device proc (No such file or directory)
k3b: /dev/hdc resolved to /dev/hdc
k3b: /dev/hdc is block device (0)
k3b: /dev/hdc seems to be cdrom
k3b: (K3bDevice::DeviceManager) dev /dev/hdc already found
k3b: (K3bDevice::DeviceManager) found config entry for devicetype: HL-DT-ST DVDRAM GSA-4163B
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/hda5
k3b: /dev/hda5 resolved to /dev/hda5
k3b: /dev/hda5 is block device (5)
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: INQUIRY (12)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/hda1
k3b: /dev/hda1 resolved to /dev/hda1
k3b: /dev/hda1 is block device (1)
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: INQUIRY (12)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/hda6
k3b: /dev/hda6 resolved to /dev/hda6
k3b: /dev/hda6 is block device (6)
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: INQUIRY (12)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/cdrom
k3b: (K3bDevice::DeviceManager) found device for /dev/cdrom: /dev/hdc
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/hdc
k3b: (K3bDevice::DeviceManager) found device for /dev/hdc: /dev/hdc
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/fd0
k3b: /dev/fd0 resolved to /dev/fd0
k3b: /dev/fd0 is block device (0)
k3b: (K3bDevice::ScsiCommand) failed:
k3b: command: INQUIRY (12)
k3b: errorcode: 0
k3b: sense key: NO SENSE (2)
k3b: asc: 0
k3b: ascq: 0
k3b: ERROR: (K3bDevice::Device) Unable to do inquiry.
k3b: (K3bDevice::DeviceManager) scanning fstab: devpts
k3b: Could not resolve devpts
k3b: (K3bDevice::Device) Error: could not open device devptsfor reading
k3b: could not open device devpts (No such file or directory)
k3b: Could not resolve devpts
k3b: devpts resolved to devpts
k3b: (K3bDevice::Device) Error: could not open device devptsfor reading
k3b: could not open device devpts (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: proc
k3b: Could not resolve proc
k3b: (K3bDevice::Device) Error: could not open device procfor reading
k3b: could not open device proc (No such file or directory)
k3b: Could not resolve proc
k3b: proc resolved to proc
k3b: (K3bDevice::Device) Error: could not open device procfor reading
k3b: could not open device proc (No such file or directory)
k3b: (K3bExternalBinManager) Cdrecord 2.1 features: gracetime, overburn, cdtext, clone, tao, cuefile, xamix, plain-atapi, hacked-atapi
k3b: (K3bExternalBinManager) 2 1 -1 seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
k3b: (K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
k3b: Devices:
k3b: ------------------------------
k3b: Blockdevice: /dev/hdc
k3b: Generic device:
k3b: Vendor: HL-DT-ST
k3b: Description: DVDRAM GSA-4163B
k3b: Version: A101
k3b: MountDevice: /dev/cdrom
k3b: Mountpoint: /mnt/cdrom
k3b: Write speed: 7056
k3b: Profiles: DVD-ROM; DVD-R sequenziale; DVD-RAM; DVD-RW a riscrittura limitata; DVD-RW sequenziale; DVD+RW; DVD+R; DVD+R a doppio strato; CD-ROM; CD-R; CD-RW
k3b: Devicetype: CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL
k3b: Writing modes: SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Riscrittura limitata
k3b: Reader aliases: /dev/hdc, /dev/cdrom, /dev/dvd, /dev/cdrw
k3b: ------------------------------
k3b: (K3bFileTreeView::addCdDeviceBranches)
k3b: (K3bFileTreeView::addCdDeviceBranches) done
k3b: (K3bFileTreeView::addCdDeviceBranches)
k3b: (K3bFileTreeView::addCdDeviceBranches) done
k3b: linux kernel version: 2.4.31
k3b: linux kernel version: 2.4.31
k3b: linux kernel version: 2.4.31
k3b: linux kernel version: 2.4.31
k3b: linux kernel version: 2.4.31
k3b: (K3bCore) System problems:
k3b: - none -

root@darkstar:~#

[napoleone1981]

Hai provato a fare come ti ho detto io??? Non lo far partire dalla console. Da utente normale usa il menu. e poi come ti ho detto.

[useless]

ecco, esatto, fai come dice napoleone!

[pol]

Hai provato a fare come ti ho detto io??? Non lo far partire dalla console. Da utente normale usa il menu. e poi come ti ho detto.

niente da fare,
apro k3b, impostazioni > impostazioni k3b >ho messo la password di root ma non succede niente, inserendo la password non si apre nessuna finestra

un'altra cosa,
quando apro k3b mi compare il classico messaggio

cdrecord sarà eseguito senza i privilegi di amministratore

È vivamente raccomandato configurare cdrecord per farlo eseguire con i provilegi di amministratore. Solo allora cdrecord sarà eseguito con priorità elevata che incrementa la stabilità complessiva del processo di scrittura..............etc
poi sotto c'è un tasto Avvia "Impostazioni di k3b2"
Cos'è questo k3b2 ??

[syaochan]

poi sotto c'è un tasto Avvia "Impostazioni di k3b2"
Cos'è questo k3b2 ??

Hai provato a premerlo?

[napoleone1981]

E' proprio quello che cercavi...

[pol]

spiegati meglio

[napoleone1981]

E' una scorciatoia a Impostazioni->Impostazioni K3b.
Un'altro metodo è anadare su K->Sistema->Impostazioni k3b.
Se non sbaglio, qualche versione fa, c'erano dei problemi con questa utility.. Prova ad installare l'ultima versione

[pol]

Ho propio fatto quello di installare l'ultima versione, l'ho installato con pkgtool, finita l'installazione ho tentato di aprire k3b, mi è comparso un messaggio dicendomi che kde non era riuscito ad aprire k3b.
Mi sa che devo masterizzare da root, oppure reinstallare la slack

[Harp]

o_O

[darkside04]

io avevo lo stesso problema da root mi rilevava i dischi ma da utente no! Inoltre quando davo la password per accedere al file di configurazione e assegnare il gruppo K3b nisba non ne voleva sapere...Mi è stato consigliato allora di creare un alias in /etc/sudoers "Cmnd_Alias NOME_COMANDI = tuopercorso/k3b" e in questo modo sono riuscito ad assegnare il gruppo k3b, mentre provando in tutti i modi consigliati non c'ero riuscito.

[pol]

io avevo lo stesso problema da root mi rilevava i dischi ma da utente no! Inoltre quando davo la password per accedere al file di configurazione e assegnare il gruppo K3b nisba non ne voleva sapere...Mi è stato consigliato allora di creare un alias in /etc/sudoers "Cmnd_Alias NOME_COMANDI = tuopercorso/k3b" e in questo modo sono riuscito ad assegnare il gruppo k3b, mentre provando in tutti i modi consigliati non c'ero riuscito.

Fammi un esempio più chiaro, questo "Cmnd_Alias NOME_COMANDI = tuopercorso/k3b" mi viene un po difficile da capire .